Site icon MapYourTech

Data Planes in Telecom Networks

Data Planes are set of network elements which receive, send, and switch the network data.
 As per the  Generalized Multi-Protocol Label Switching (GMPLS) standards, following nomenclature is used for various technological data planes:
  • Packet Switching Capable (PSC) layer
  • Layer-2 Switching Capable (L2SC) layer
  • Time Division Multiplexing (TDM) layer
  • Lambda Switching Capable (LSC) layer
  • Fiber-Switch Capable (FSC)

And as per Layered architectures concepts ;above technologies are correlated as:-

  • Layer 3 for PSC (IP Routing)
  • Layer 2.5 for PSC (MPLS)
  • Layer 2 for L2SC (often Ethernet)
  • Layer 1.5 for TDM (often SONET/SDH)
  • Layer 1 for LSC (often WDM switch elements)
  • Layer 0 for FSC (often port switching devices based on optical or mechanical technologies)

**********************************************************************************************

In a “N” Layered Network Architecture, the services are grouped in a hierarchy of layers

– Layer N uses services of layer N-1

– Layer N provides services to layer N+1

A communication layer is completely defined by

(a) A peer protocol which specifies how entities at layer-N communicate.

(b) The service interface which specifies how adjacent layers at the same system communicate

 When talking about two adjacent layers,

(a) the higher layer is a service user, and

(b) the lower layer is a service provider

– The communication between entities at the same layer is logical

– The physical flow of data is vertical.