Last Updated: August 16, 2025
1 min read
138
When the bit error occurs to the system, generally the OSNR at the transmit end is well and the fault is well hidden.
Decrease the optical power at the transmit end at that time. If the number of bit errors decreases at the transmit end, the problem is non-linear problem.
If the number of bit errors increases at the transmit end, the problem is the OSNR degrade problem.
General Causes of Bit Errors
- Performance degrade of key boards
- Abnormal optical power
- Signal-to-noise ratio decrease
- Non-linear factor
- Dispersion (chromatic dispersion/PMD) factor
- Optical reflection
- External factors (fiber, fiber jumper, power supply, environment and others)
Optical Communications & Network Automation Expert | Author of 3 Books for Optical Engineers | Founder, MapYourTech
Optical networking engineer with nearly two decades of experience across DWDM, OTN, coherent optics, submarine systems, and cloud infrastructure. Founder of MapYourTech. Read full bio →
Follow on LinkedIn
