Technical
Showing 641 - 650 of 684 results
Bit error rate, BER is a key parameter that is used in assessing systems that transmit digital data from one...
-
Free
-
March 26, 2025
Why it is Good to have ORL >30dB for general fiber links? Optical return loss (ORL) is the logarithmic ratio...
-
Free
-
March 26, 2025
Comprehensive Guide to Fiber Optic Splitters and Tap Ratios | MapYourTech Basic understanding on Tap ratio for Splitter and Coupler...
-
Free
-
March 26, 2025
As we know that either homodyne or heterodyne detection can be used to convert the received optical signal into an electrical form. In the...
-
Free
-
March 26, 2025
What Is Coherent Communication? Definition of coherent light A coherent light consists of two light waves that: 1) Have the...
-
Free
-
March 26, 2025
In a non-coherent WDM system, each optical channel on the line side uses only one binary channel to carry service information. The service transmission...
-
Free
-
March 26, 2025
For coherent signals with wide optical spectrum, the traditional scanning method using an OSA or inband polarization method (EXFO) cannot...
-
Free
-
March 26, 2025
Why does FEC introduce latency? The addition of FEC overhead at the transmit end and FEC decoding at the receive...
-
Free
-
March 26, 2025
Why does coherent detection introduce pre-FEC bit errors? The DSP algorithm at the receive end detects and analyzes the phase...
-
Free
-
March 26, 2025
The ITU standards define a “suspect internal flag” which should indicate if the data contained within a register is ‘suspect’...
-
Free
-
March 26, 2025
Explore Articles
- Analysis
- Automation
- Careers and Learning Paths
- Coherent Optics
- Data Center Interconnect
- Free
- Fundamentals
- Management
- Network Architecture
- Planning & Design
- Premium
- Security
- Standards
- Submarine and Long-Haul
- Technical
- Testing
- Tools and Simulators
- Trends & News
- Troubleshooting and Operations
- Vendor and Product Landscape
Filter Articles
ResetExplore Courses
Tags
automation
ber
Coherent detection
coherent optical transmission
coherent optics
Data transmission
distributed Raman amplification
DWDM
edfa
EDFA noise figure
fec
Fiber optics
Fiber optic technology
Forward Error Correction
Latency
modulation
network automation
noise figure
optical
Optical communication
Optical fiber
Optical network
optical network automation
Optical network design
optical networking
Optical networks
Optical signal-to-noise ratio
Optical transport network
OSNR
OSNR calculation
OTN
Probabilistic Constellation Shaping
Q-factor
raman
Raman amplification
Raman Amplifier
ROADM
Signal integrity
Signal quality
Slider
spectral efficiency
submarine
submarine cable systems
Telecommunications
Ticker