Technical
“In analog world the standard test message is the sine wave, followed by the two-tone signal for more rigorous tests. ...
-
Free
-
March 26, 2025
The Bit Error Ratio (BER) is often specified as a performance parameter of a transmission system, which needs to be...
-
Free
-
March 26, 2025
The maintenance signals defined in [ITU-T G.709] provide network connection status information in the form of payload missing indication (PMI), backward...
-
Free
-
March 26, 2025
The Optical Time Domain Reflectometer (OTDR) is useful for testing the integrity of fiber optic cables. An optical time-domain reflectometer (OTDR)...
-
Free
-
March 26, 2025
Chromatic dispersion affects all optical transmissions to some degree.These effects become more pronounced as the transmission rate increases and fiber length...
-
Free
-
March 26, 2025
When Ethernet was developed it was recognized that the use of repeaters to connect segments to form a larger network would...
-
Free
-
March 26, 2025
Auto-Negotiation for fiber optic media segments turned out to be sufficiently difficult to achieve that most Ethernet fiber optic segments...
-
Free
-
March 26, 2025
To detect a failure that occurs at the source (e.g., laser failure) or the transmission facility (e.g., fiber cut), all...
-
Free
-
March 26, 2025
As defined in G.709 an ODUk container consist of an OPUk (Optical Payload Unit) plus a specific ODUk Overhead (OH). ...
-
Free
-
March 26, 2025
Layer 0(zero) merely introduces any latency to the network. It’s mostly the electronics that imparts latency in the network....
-
Free
-
March 26, 2025
Explore Articles
- Analysis
- Automation
- Careers and Learning Paths
- Coherent Optics
- Data Center Interconnect
- Free
- Fundamentals
- Management
- Network Architecture
- Planning & Design
- Premium
- Security
- Standards
- Submarine and Long-Haul
- Technical
- Testing
- Tools and Simulators
- Trends & News
- Troubleshooting and Operations
- Vendor and Product Landscape
Filter Articles
ResetTags
automation
ber
Coherent detection
coherent optical transmission
coherent optics
Data transmission
distributed Raman amplification
DWDM
edfa
EDFA noise figure
fec
Fiber optics
Fiber optic technology
Forward Error Correction
Latency
modulation
network automation
noise figure
optical
Optical communication
Optical fiber
Optical network
optical network automation
Optical network design
optical networking
Optical networks
Optical signal-to-noise ratio
Optical transport network
OSNR
OSNR calculation
OTN
Probabilistic Constellation Shaping
Q-factor
raman
Raman amplification
Raman Amplifier
ROADM
Signal integrity
Signal quality
Slider
spectral efficiency
submarine
submarine cable systems
Telecommunications
Ticker