🎁 Get 30% OFF Your First Course – Limited Time Offer! 🚀 Use Code: MAPYOURTECH at Checkout 

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Articles
Books
Courses
HomeTechnicalPage 41

Technical

Showing 401 - 410 of 436 results
Why does coherent detection introduce pre-FEC bit errors? The DSP algorithm at the receive end detects and analyzes the phase...
  • Free
  • March 26, 2025
The ITU standards define a “suspect internal flag” which should indicate if the data contained within a register is ‘suspect’...
  • Free
  • March 26, 2025
A Lower Order-ODU or LO-ODU is an ODUk, whose OPUk transports a inside mapped client. An Higher Order-ODU or HO-ODU is...
  • Free
  • March 26, 2025
The main advantages and drawbacks of EDFAs are as follows. Advantages Commercially available in C band (1,530 to 1,565 nm)...
  • Free
  • March 26, 2025
Optical power tolerance: It refers to the tolerable limit of input optical power, which is the range from sensitivity to...
  • Free
  • March 26, 2025
When the bit error occurs to the system, generally the OSNR at the transmit end is well and the fault...
  • Free
  • March 26, 2025
**Multiplicative factor is just a simple math :eg. for ODU1/OPU1=3824/3808={(239*16)/(238*16)} Here value of multiplication factor will give the number of...
  • Free
  • March 26, 2025
Non-linear interactions between the signal and the silica fibre transmission medium begin to appear as optical signal powers are increased...
  • Free
  • March 26, 2025
What is a OTDR ? Optical Time Domain Reflectometer – also known as an OTDR, is a hardware device used for measurement of...
  • Free
  • March 26, 2025
Items HD-FEC SD-FEC Definition Decoding based on hard-bits(the output is quantized only to two levels) is called the “HD(hard-decision) decoding”,...
  • Free
  • March 26, 2025

Course Title

Course description and key highlights

Course Content

Course Details