🎁 Get 30% OFF Your First Course – Limited Time Offer! 🚀 Use Code: MAPYOURTECH at Checkout 

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Articles
Books
Courses
HomeTechnicalPage 42

Technical

Showing 411 - 420 of 436 results
Power Change during add/remove of channels on filters The power change can be quantified as the ratio between the number...
  • Free
  • March 26, 2025
Few analogies proving the subject:- If the distance is to short and the attenuator is too close to the transmitter,...
  • Free
  • March 26, 2025
The maximum number of erbium-doped fiber amplifiers (EDFAs) in a fiber chain is about four to  six.   Explanation  The rule is based on...
  • Free
  • March 26, 2025
The first thing to note is that for each frame there are two sets of 20 parity bits. One set...
  • Free
  • March 26, 2025
Optical Fiber Link Design requirements The optical link design essentially is putting the various optical components, so that information can...
  • Free
  • March 26, 2025
Here the results are after evaluating the effect of a thermal variation on the output tilt. In this particular set-up the...
  • Free
  • March 26, 2025
Compared with requirements for EDFAs for terrestrial applications and for Submarine applications, there are major important differences making the two...
  • Free
  • March 26, 2025
Spectral Hole Burning (SHB) Spectral hole burning (SHB) is a major limitation of amplified WDM systems with high channel count. The...
  • Free
  • March 26, 2025
Map of transmission impairments in long-haul submarine systems and some techniques/technologies for their mitigation or compensation.  ... Free Membership Required...
  • Free
  • March 26, 2025
The 980nm pump needs three energy level for radiation while 1480nm pumps can excite the ions directly to the metastable...
  • Free
  • March 26, 2025

Course Title

Course description and key highlights

Course Content

Course Details